On this page
- What should the inventory tell you?
- Which records do you scan, and which do you summarise?
- What order should the work follow?
- How should files be named and indexed?
- What does the six-week plan look like?
- Who does what?
- How do you verify the migration?
- What happens to the paper?
- What should you do with illegible notes?
- What tends to break after the switch?

Move paper dental records in phases: count what you hold, agree a naming and index scheme, scan closed files, enter active treatment plans and current charts, verify a sample patient by patient, then set a cutover date for new records. Keep the paper for your retention period. Do not re-enter years of closed notes.
The first instinct is to buy a scanner and start feeding files through it. That is the third step. The first two are counting what you hold and deciding how a file will be found later.
A clinic that starts with the scanner ends up with 4,000 PDFs named IMG_0001 to IMG_4000, no index, and a team that still cannot find a patient's chart. The project fails at retrieval, not at scanning.
What should the inventory tell you?
Before touching a file, answer five questions. The answers set the size of the job.
- How many patients are on file, and how many were seen in the last two years?
- What condition are the files in: dry, damp, damaged, complete?
- Which records support an open treatment plan, an orthodontic case, an implant under review or a complaint?
- Which files are duplicated because a patient registered twice under different spellings?
- Who is allowed to see a file while it is being moved?
Count in shelves, not in guesses. A clinic that thinks it has 3,000 files often has 5,000, because the second register was never merged with the first. The count also gives you a way to check the work later: 4,200 files in, 4,200 records out.
Which records do you scan, and which do you summarise?
This is the decision that saves the most money. Scanning is cheap per page. Typing is not.
Swipe the table to see every column| Record | Scan the original | Summarise into the new record |
|---|---|---|
| Registration form | Yes | Name, contact, age, alerts |
| Clinical notes, closed case | Yes | Not needed |
| Clinical notes, active case | Yes | Current state, open items, last visit |
| Odontogram | Yes | Re-enter for active cases only |
| Periodontal chart | Yes | Re-enter the most recent chart |
| Radiographs and photographs | Yes, at full resolution | Date, tooth and view in the record |
| Open treatment plan and estimate | Yes | Plan items, amounts, payments made |
| Invoices and receipts | Yes, for the period your CA needs | Outstanding balance per patient |
| Lab slips in progress | Yes | Lab, shade, tooth, expected date |
| Consent forms for active treatment | Yes | Date, procedure, who signed |
| Complaints and correspondence | Yes | Summary and outcome |
The pattern is simple. A closed case needs a copy. An open case needs a working record.
What order should the work follow?
Active cases first, because they are the ones a dentist will open tomorrow and the ones where a missing detail changes a decision.
Then the patients most likely to ask for a copy: those who have moved, those with a medico-legal question, those insured or on a company plan. Then the rest of the closed files, oldest last.
Within each batch, complete one patient at a time. A clinic that scans 200 registration forms and then 200 notes has 200 half-records sitting in a folder. A clinic that finishes 30 patients has 30 records it can use.
How should files be named and indexed?
Use a scheme that a temporary staff member could follow without asking.
PATIENTID_LASTNAME_RECORDTYPE_YYYY-MM-DD.pdf
So 1042_NAIR_notes_2024-03-11.pdf and 1042_NAIR_opg_2024-03-11.jpg. The patient ID comes first so the files sort together, and the date is written year first so it sorts correctly.
Avoid names alone. Spelling varies, and two patients called Sharma are common. Avoid "final" and "new" in file names, because both stop being true within a month.
Then store the file where the record points to it. If the scan lives in a shared drive and the patient record lives in software, the software should link to the file rather than hold a copy that can drift. Our guide to the dental software migration checklist covers the vendor questions to ask about imports and file storage.
What does the six-week plan look like?
Week 1: inventory and decisions. Count the files, list the duplicates, choose the naming scheme, decide what will be scanned and what will be summarised. Write it down in one page. Name the person who owns the project; it should not be the busiest dentist.
Week 2: set up and pilot. Get the scanner, the storage and the permission rules ready. Process 50 files from start to finish, including the index entry, and time it. The pilot will show whether the plan is realistic. Adjust the per-file time, not the scope, if it is not.
Week 3: closed files, batch one. Scan and index the oldest and least risky files. Use two people if possible: one scans, one names and checks. Keep a running count on a whiteboard so the team can see progress.
Week 4: active cases. This is the week that matters. Scan the full file, then enter the summary: current chart, open plan, balance and last visit. A dentist should review each active summary before it goes live, because a wrong tooth number in a migrated chart is worse than no chart.
Week 5: verify and train. Pull 20 records at random and check them against the paper. Name, date of birth, phone, balance, active plan, last visit, image legibility. Log every mismatch and fix it. Train the front desk on retrieval, and train the dentists on where the summary sits beside the scan.
Week 6: cutover. Pick a date after which new records are digital only. Freeze the paper files, put them in the store, and update the register. Keep a small exceptions book for anything that still arrives on paper, such as a referral letter from another clinic.
Who does what?
Four roles are enough, and one person can hold more than one in a small clinic.
The owner or senior dentist decides what is in scope and signs off the cutover. The front desk lead owns the index and the naming, because they will be the person searching it. A scanning assistant does the pages, and can be temporary. A verifier, ideally not the scanner, checks the sample and the active summaries.
The dentist's job is the part nobody else can do: confirming that the migrated chart and the open plan match what is actually in the patient's mouth.
How do you verify the migration?
Verification is a sample, a list and a signature.
Take 20 files across the batches, including at least five active cases. For each, compare the digital record with the paper on six fields: identity, contact, balance, active plan, last visit and the chart. Write the result in a log with the date and the initials of the checker.
Then check retrieval. Ask someone who did not do the scanning to find three patients by name and one by phone number, and time it. If the record cannot be found in a minute, the index needs work, and it is better to know that in week five than in month five.
What happens to the paper?
It stays, for the retention period in your policy. A scan is a copy, and a bad scan of a fading page is not the same record.
Keep the files in a dry, locked space, in labelled boxes by patient ID range, with a register that says what is in each box. Add a note to the digital record that a paper original exists and where. When the retention period ends, destroy the paper only with a written approval, and record the date and the method.
The retention question itself is not simple, and our guide to dental patient records retention in India explains why a single number does not exist.
What should you do with illegible notes?
Do not guess. A guess in a clinical record is a false statement with good intentions.
Transcribe what you can read, and mark the rest as [illegible] with the page reference. Keep the scan beside the transcript, so a reader can see the original. If the dentist who wrote the note still works at the clinic, ask them to add a dated annotation explaining the entry. If they have left, leave it.
The same rule applies to a tooth number that could be 36 or 38. Write [36?] and note the ambiguity, rather than choosing the more likely one. A future reader needs to know the record was uncertain, not to inherit a confident error.
What tends to break after the switch?
Duplicates are the most common. A patient registers again with a different spelling, and now has two records and two balances. Decide in week one how duplicates will be merged, and give one person the authority to do it.
Missing balances are second. A migrated patient record without the outstanding amount creates a billing argument at the next visit. Check the balance for every active case before cutover.
Undated radiographs are third. An image with no date is hard to use and easy to misread. If the date is unknown, record [date unknown] rather than inventing one.
IvoryCRM holds the patient record, the chart and the plan in one place, and the switching page sets out what a migration includes. The scanning happens in your clinic. A clinic that follows this order ends the six weeks with a record it can find by patient ID, and a store room register that says where the paper still is.
Frequently asked questions
How long does it take to digitise a dental clinic's paper records?
For a single clinic with a few thousand files, four to six weeks of part-time work is realistic if you scan closed cases and summarise active ones. A five-branch group takes longer, mostly because of naming and verification, not scanning. The scanning itself is the fastest step in the project.
Should I scan every page of every file?
No. Scan the full file for patients with an active plan, an open complaint or a case that affects future treatment. For closed cases, a scanned file is enough to answer a later request. Re-entering every historical note into the new system costs far more than it returns.
What do I do with the paper files after scanning?
Keep them for the retention period in your written policy, in a dry, locked space with a register of what is inside. A scan is a copy, and a poor scan is not a substitute. Destroy the paper only after the retention period, with a record of the date and the approval.
How do I handle notes I cannot read?
Transcribe what is legible, mark the rest as illegible with square brackets, and keep the scanned original beside the summary. Do not guess at a word or a tooth number. If the author is still at the clinic, ask them to add a dated note explaining what they meant.
Can we run paper and digital at the same time?
For a few weeks, yes, and it is the safer way to switch. Run both for new patients while the team learns the system, then pick a cutover date after which new records are digital only. A parallel run that lasts six months usually means nobody trusts either record.
See it with your own clinic day.
Book a walkthrough and follow a patient from booking through charting, treatment and billing. No patient data is needed.