On this page
- What is an odontogram?
- How does FDI two-digit notation work?
- What is the difference between per-tooth and per-surface charting?
- What do the symbols mean?
- What is the difference between a chart and a treatment plan?
- Can you read a chart from its description?
- Where does the chart stop?
- How do you explain a chart to a patient?

An odontogram is a diagram of the teeth used to record findings and treatment tooth by tooth. In India most clinics use FDI two-digit notation, where the first digit names the quadrant and the second names the tooth, so 36 is the lower left first molar. It records what is present, not what should be done.
A patient points at the screen and asks what the 36 means. The dentist says it is a lower left molar, and the patient looks at a diagram of 32 teeth with numbers on them and no idea which one is 36.
An odontogram is one of the few clinical documents a patient can actually read, and one of the few that a receptionist, a hygienist and a second dentist can all use without translation. It is also easy to record badly.
What is an odontogram?
An odontogram is a diagram of the upper and lower teeth, arranged as they sit in the mouth, with a number on each tooth. Findings are marked on the tooth or on a surface of it: a restoration, a missing tooth, a crown, a root canal, an implant, a fracture.
The diagram is older than any software. Paper versions have been printed in dental notes for decades, with a pen and a set of agreed marks. What changed is that dental charting software can store the history, link the finding to the treatment plan and show the same record at a second branch.
An odontogram records the state of the mouth. It does not record the diagnosis, the reasoning or the plan, though a good chart keeps those one click away. The clinical decision stays with the dentist.
How does FDI two-digit notation work?
The FDI notation system, the standard taught in Indian dental colleges, gives each tooth two digits.
The first digit is the quadrant. Numbering runs clockwise from the patient's upper right as you look at them:
- 1 is the upper right
- 2 is the upper left
- 3 is the lower left
- 4 is the lower right
The second digit is the tooth, counted from the midline outwards. 1 is the central incisor, 2 the lateral incisor, 3 the canine, then the premolars 4 and 5, and the molars 6, 7 and 8.
Swipe the table to see every column| Number | What it names |
|---|---|
| 11 | Upper right central incisor |
| 16 | Upper right first molar |
| 23 | Upper left canine |
| 34 | Lower left first premolar |
| 36 | Lower left first molar |
| 46 | Lower right first molar |
| 48 | Lower right third molar |
| 55 | Upper right primary second molar |
| 75 | Lower left primary second molar |
| 85 | Lower right primary second molar |
The elegance of the system is that the number carries the location. A note that says "36" needs no further description, and a colleague in another city reads it the same way.
The older universal system numbers the teeth from 1 to 32 across the whole mouth. It is still used in the United States and appears in some textbooks, which is why a chart imported from another country may need a conversion. Pick one system, write it in the practice manual, and do not mix them in the same record.
Primary teeth use a separate set of quadrants. The first digit runs 5 to 8, and the second runs 1 to 5, so 51 is the upper right primary central incisor and 85 is the lower right primary second molar. A mixed dentition chart will hold both sets at once, and that is where numbering errors start.
What is the difference between per-tooth and per-surface charting?
A per-tooth chart records one state for the whole tooth. It is quick and it is enough for a missing tooth, a crown or an implant.
A per-surface chart divides the tooth into surfaces and records each one. For a posterior tooth the usual surfaces are mesial, distal, buccal, lingual and occlusal. For an anterior tooth, the incisal edge takes the place of the occlusal surface.
The difference matters when a tooth has more than one finding. A molar with a mesial restoration and a distal fracture is two facts, and the surface chart keeps them apart. That matters later, when someone asks whether the fracture was there before the filling.
Surface charting costs more clicks per visit. A clinic that treats mostly children with sealants and small fillings may not need it everywhere. A practice doing crowns, onlays and implant work usually does.
What do the symbols mean?
There is no single international symbol set, which is the part that surprises new staff.
A filled shape usually means a restoration. A cross or a strike-through usually means a missing or extracted tooth. An outline around the crown of the tooth often means a crown, and lines drawn down the roots usually mean root canal treatment. An implant is often drawn as a screw or a post.
But a clinic can find a red surface meaning decay in one system and a completed restoration in another. Some charts use blue for existing work and red for work to be done. Others use one colour and rely on the note.
Two habits prevent the confusion:
- Keep a legend in the practice manual, with a screenshot of your own chart and the meaning of each symbol.
- Explain the legend to every new associate and front desk member in their first week, not in their first complaint.
A chart that only its author can read is a private note, not a record.
What is the difference between a chart and a treatment plan?
A chart shows what is there now. A treatment plan shows what is proposed, in what order, at what cost, and with what status.
The two get blended when a clinic marks a tooth as "crown" before the patient has agreed to one. The next dentist then reads the chart as a record of a crown that exists. Keep them separate: the finding on the chart, the proposed procedure on the plan, and the completed procedure on the visit note.
This separation also helps the front desk. A plan with a status for each item can be quoted, partly accepted and invoiced in stages. A chart cannot carry a price.
Can you read a chart from its description?
Here is a short exercise. Read these five lines and decide what is recorded, not what should be done.
- 16 occlusal restoration, dated March 2025.
- 36 missing, extracted 2023, note refers to a bridge discussion.
- 21 mesial fracture, no restoration recorded.
- 46 crown, placed 2024, with a note about a marginal check at the last visit.
- 75 mobile, primary tooth, patient age 9.
If you read that as one molar with a filling, one lower left molar gone, a chipped upper left central incisor, a crowned lower right molar and a loose primary molar in a nine-year-old, the chart is doing its job. None of the five lines says what treatment to provide. That is the plan's work, and it belongs in a separate document with its own date.
A chart that also records who entered a finding and when is more useful than one that only shows the current state. The history is what turns a diagram into a record.
Where does the chart stop?
An odontogram records position and condition. Several things about a tooth do not fit on a diagram.
It does not record periodontal probing depths, which belong in a separate chart and follow their own conventions, as our guide to periodontal charting explains. It does not show occlusion, soft tissue, bone level, the shade of a restoration or how a patient feels about the tooth. It cannot show that a filling was replaced twice, unless the practice records each version.
It is also only as accurate as the person entering it. A chart filled in at the end of a long day, from memory, is a guess with a timestamp. The useful rule is to chart at the chair, while the patient is there, and to write the note in the same minute.
How do you explain a chart to a patient?
Show the tooth, not the code. "This is your lower left first molar, the big one near the back" does more than "36".
Then use the chart to hold the conversation together. Point at the tooth that hurts, the one that is missing, the one the plan proposes to crown. A patient who can see the arrangement understands why a bridge needs the teeth on either side, and why a missing molar changes how the opposite tooth meets.
A digital chart on a screen is better for this than a printout, because you can rotate the view and show the same tooth in the plan. Our guide to digital dental charting covers what changes when the chart lives in software rather than on paper.
Keep the explanation short and let the patient ask. The chart shows the tooth. The note records what the patient decided.
Frequently asked questions
What is the difference between an odontogram and a dental chart?
Clinics use the words almost interchangeably. An odontogram is the diagram of the teeth, and a dental chart is the diagram plus the findings recorded on it. In software the chart usually includes per-tooth notes, surfaces, symbols and a history, so the two mean the same thing in daily use.
Why does FDI numbering start at 11 and not 1?
The first digit is the quadrant and the second is the tooth, counted from the midline. Quadrant 1 is the patient's upper right, so the central incisor there is 11 and the third molar is 18. Numbering from 1 to 32 is the older universal system, still used in the United States.
How do you number primary teeth in FDI?
Primary teeth use quadrants 5 to 8 with tooth numbers 1 to 5. So 51 is the upper right primary central incisor, 55 is the upper right primary second molar, and 85 is the lower right primary second molar. Mixing primary and permanent numbers in one note is a common source of errors.
Can an odontogram replace clinical notes?
No. The chart shows where a finding is, and the note explains what it is, what was seen and what was discussed. A chart with a coloured surface and no note tells the next dentist very little. The clinical decision stays with the dentist, and the reasoning belongs in the record.
Do all clinics use the same odontogram symbols?
No. FDI numbering is standard, but symbols and colours vary between software and between countries. A filled square, a blue surface or a red outline can mean different things in two systems. Each practice should keep a legend in the record and explain it to new staff.
See it with your own clinic day.
Book a walkthrough and follow a patient from booking through charting, treatment and billing. No patient data is needed.